AC Repair in Booneville, MS: How to Repair 3 Frequent Problems

There can be several reasons why your air conditioning won’t run: a triggered circuit breaker, incorrect thermostat settings, a switched off switch or an overfull condensate drain pan.

Your AC won’t run when you have a blown breaker.

To check if one has gotten overloaded, go to your residence’s main electrical panel. You can spot this metallic fixture on the wall in the basement, garage or closet.

• Confirm your hands and feet aren’t wet before you work on the panel or breakers.
• Find the breaker identified “AC” and make sure it’s in the “on” spot. If it’s triggered the breaker will be in the middle or “off” position.
• Quickly transfer the breaker back to the “on” location. If it immediately triggers again, don’t touch it and call us at 662-269-8716. A breaker that keeps tripping might mean your house has an electrical issue.

If your thermostat isn’t giving a sign to your equipment to work, it won’t turn on.

The main step is ensuring it’s on “cool” and not “heat.” Otherwise your AC may not switch on. Or you may have. warm air blowing from vents since the furnace is running instead.

If you have a regular thermostat:

• Swap out the batteries if the screen is empty. If the screen is showing garbled numbers, buy a new thermostat.
• Check the right mode is displaying. If you can’t change it, cancel it by decreasing the temperature and pressing the “hold” button. This will force your AC to work if the configuration is wrong.
• Attempt to set the thermostat 5 degrees colder than the space’s temperature. Your AC won’t work if the thermostat is set the same as the house’s temperature.

Once your thermostat is adjusted correctly, you should start getting cold air promptly.

If you have a smart thermostat, including ones manufactured by Nest, Ecobee, Lux, Honeywell or Bosch, go to the manufacturer’s website for assistance. If you still can’t get it to work, contact us at 662-269-8716 for support.

Your cooling equipment probably has a shut-down lever by its outside unit. This lever is generally in a metal box attached to your house. If your AC has recently been serviced, the lever may have unintentionally been placed in the “off” setting.

Condensate drain pans keep the extra liquid your AC takes out of the air. This pan can be situated either below or in your furnace or air handler.

When there’s an obstruction or backed up drain, water can build up and trigger a safety setting to switch off your unit.

If your pan has a PVC pipe or drain, you can get rid of the extra water with a custom pan-cleaning capsule. You can purchase these tablets at a home improvement or hardware retailer.

If your pan has a pump, find the float switch. If the mechanism is “up” and there’s liquid in the pan, you may need to replace the pump. Call us at 662-269-8716 for assistance.

If your equipment is running but not delivering cold air, its airflow could be clogged. Or it might not have enough refrigerant.

Your unit’s airflow can be limited by a plugged air filter or filthy condenser.

A filthy filter can create many problems, including:

• Lower airflow
• Frozen refrigerant lines or evaporator coil
• Inconsistent cooling
• Higher cooling expenses
• Making your system stop working sooner

We propose replacing flat filters once a month, and accordion filters every three months.

If you can’t recall when you last changed yours, switch off your equipment completely and pull out the filter. You can locate the filter in your furnace or air pump’s blower compartment. It could also be found in an adjoining filter case or wall-mounted return air grille.

Hold the filter up to the light. If you see a lot of dust you need to get a new one.

Brush, vegetation and leaves can block your condensing equipment. This can restrict its airflow, lower its energy efficiency and change your comfort. Here’s a method you can follow to get your equipment operating smoothly again.

1. Switch off the electrical current totally at the breaker or outdoor lever.
2. Clear yard waste around the air conditioner. Once you’ve removed larger clutter within a two-foot space, you can use a soft brush or vacuum to gingerly remove dust from the equipment’s fins. Misshapen fins can also impact capability, so you can attempt to reshape them with a dinner knife.
3. Use a hose nozzle to gingerly clean the fins from inside the equipment. Be careful to avoid getting liquid on the fan motor.
4. Put the top back on and turn the power back on.

When air conditioning systems don’t have ample refrigerant, they’ll struggle to remove heat and humidity from your rooms.

Here are a few symptoms that your unit is losing refrigerant:

1. It takes a long time to cool your home and you’re regularly turning down the thermostat.
2. Air conditioning moving through the vents isn’t as cold as it should be.
3. You’re noticing hissing or bubbling sounds when the air conditioning is on.
4. Your evaporator coil is icy on account of having trouble absorbing humidity.

Think your system is seeping refrigerant? You need a licensed heating and cooling service expert to take care of the leak and restore the proper amount of refrigerant in your equipment. Call us at 662-269-8716 for support.

When it feels like you’re not getting adequate amounts of cool air, there’s possibly a clog or disconnection inside your cooling unit.

• The beginning stage is looking at your air filter. Get a new one if it’s dirty.
• Then ensure the vents are clear around your residence.
• If you’re still not getting enough cold air, you should have your ductwork examined by a specialist like Booneville Heating & Cooling. Your ductwork might need to be serviced or hooked up again in difficult spots like your attic, basement or crawl space.